Honeywell
35
Please highlight icon
to select the corresponding function. When
completing all configurations, click
Save
, it goes back to the previous
menu.
Note
In motion detection mode, you can not use copy/paste to set
channel setup since the video in each channel may not be
the same.
In
, you can left click mouse and then drag it to set a region for
motion detection. Click Fn to switch between deployment and withdraw for
motion detection. After setting, click enter button to exit.
Figure 5-12 Preset
Figure 5-13 Motion Detection Region
Loss Detect
In
Event Type
, select
Loss Detect
from the drop-down list.
