manualshive.com logo in svg

Honeywell HDZ20HD, Руководство пользователя, Страница: 126 / 164

Поделиться
Скачать
Honeywell HDZ20HD Скачать руководство пользователя страница 126

www.honeywell.com/security

126  |  HDZ Series IP PTZ User Manual

Figure 7-14

DDNS Settings Screen

Recording Settings

This section describes how to set up a recording to a microSDHC card or NAS device.

You can set the camera to record continually, disable recording or you can specify a particular 
timeframe (schedule) to record in.

Note

This section is only applicable for microSDHC card and NAS recording.

Configuring Recording Settings

1.

Navigate to 

System 

 Recording

 (see 

Figure 7-15

).

2.

Decide what storage device you want to record to and select it in the 

Recording Storage

 

section. Options are SD Card and NAS (see 

Storage Settings on page 129

 for more 

information on storage devices). 

3.

Under 

Recording Schedule

, select one of the following:

•

Disable

 to turn off the scheduled recording function (default selection). 

•

Always 

to record continually. 

•

Only during time frame

 to record during a particular time frame.

Содержание HDZ20HD





































































































































































Отзывы:

Нет отзывов