manualshive.com logo in svg

Honeywell HDVR, Справочное руководство, Страница: 151 / 238

Поделиться
Скачать
Honeywell HDVR Скачать руководство пользователя страница 151

HRDV Reference Guide

Rev 1.00

133

Document 900.0261

04/05

4.

Enter the desired Report Recording Time.

5.

Press 

Accept

.

A disk icon appears indicating that the clip has been selected for archiving. 

If you begin archiving a clip and change your mind, press any control button on the 
HRDV16/8 front panel to abort the archive recording.

Note

Archived clips are not removed from the regular drives; they are copied.

Archiving Clips to a Removable Drive

There are four ways to archive (copy) images to a removable drive:

•

During playback of a clip, press 

MENU

 to activate archiving of the clip being 

displayed.

•

Manually save previously recorded clips as discussed in 

Saving Clips to a CD-ROM 

Drive

.

•

Create a report, set up the run report automatically to copy to disk, select the report 
created, and set the time to archive. For more information, see 

Setting Reports to Run 

Automatically 

on page 

122

.

•

Use the RAS software to save the clip to a computer disk. The saved clip (if not too 
large) could then be burned to a CD, copied to a Zip disk, or e-mailed. Refer to the 

HRDV RAS User Guide

 for detailed information.

Hot Swapping the Removable Drive

The Hot Swap feature allows you to take out a removable hard drive from the HRDV unit 
without having to power down the HRDV. 

To activate this option:

1.

Press 

FUNCTION

 + 

Camera 2

. This closes the drive and displays the message 

Remove your hot swap drive now, hit OK after you have inserted a 
new drive

.

2.

Power off the front panel drive with the key.

3.

Remove the drive.

4.

Insert the new drive.

5.

Power on the front panel drive with the key.

Содержание HDVR















































































































































































































































Отзывы:

Нет отзывов