manualshive.com logo in svg

Honeywell HDVR, Справочное руководство

Поделиться
Скачать
Honeywell HDVR Скачать руководство пользователя страница 102

Rev 1.00

84

Document 900.0261

04/05

Pre-Event Recording Setup

Figure 14-1

Pre-event Setup Screen

The following table describes the fields on the Pre-event Setup screen. 

Note

Audio cannot be recorded with your pre-event video clips. Audio can only be 
recorded with timelapse clips and with alarm, text, and motion event clips.

Field Description

Enable

Enable or disable Pre-event recording. When enabled, if the HRDV16/8 detects an 
event (motion, text, or alarm), the video recorded before the event is saved as a 
pre-event clip. After the event is reset—depending on the individual event reset 
types you set—the HRDV16/8 goes back to recording video data in a loop.

Length

The length of time (from 

1

 second to 

9

 minutes, 

59

 seconds) the HRDV16/8 

records a pre-event video clip. 

Record Rate

Specify the record rate, in fields per second (fps), recorded by each camera.

.1

, 

.2

, 

.5

, 

1

 to 

16 

(

10

 is default), 

20

 to 

60

 in increments of five.

Note

The total number of fps that can be recorded by all 16 cameras cannot add 
up to more than 60 fps for NTSC or 50 fps for PAL. For the HRDV8, the total 
number of fps that can be recorded by all 8 cameras cannot add up to 
more than 30 fps for NTSC or 25 fps for PAL.

Image Quality

Set image quality for events. The higher the compression rate, the longer you can 
record video before your disk is full. Options are:

Very Low (50:1, 45:1)
Low (40:1, 35:1, 30:1)
Medium (25:1, 20:1)

 (default)

High (15:1, 10:1)

Record Cameras

Enable Pre-event recording for any or all 16 cameras.

Содержание HDVR















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды