Configuring Video Analytics
55
To enable people counting:
1.
Select the
Enable
check box.
2.
Click
Draw Rule
to set up an area for people counting. You can move or resize the area
using your mouse. To move the area, drag one of the sides. To resize the area, drag one of
the corner handles.
3.
Click
Draw Target
to set up the target size. You can move or resize the area using your
mouse. To move the area, drag one of the sides. To resize the area, drag one of the corner
handles.
4.
To enable OSD which displays the Enter and Leave numbers, select the
Enable OSD
check box. To restore the numbers, click
Clear
.
5.
Next to
Alarm Period
, click
Setup
. The
Alarm Period
window opens.
6.
Set the days and times when you want the alarm function to be active, and then click
Save
.
7.
In the
Rule Name
field, enter the name of rule.
8.
In the
Direction
field, select the direction of people counting. You can select A->B or B->A,
the arrow direction always means the entrance direction.
9.
In the People Counting Alarm field, set the enter number, leave number, stranded number.
It will trigger alarm when it exceeds the limited stranded number.
10.
To start recording video when an event is detected, select the
Record
check box.
11.
In the
Record Delay
field, enter the number of seconds that the system will continue to
record video after the event has ended. Enter a value between
10
and
300
.
12.
To send an email notification when an event is detected, select the
Send Email
check box.
Email settings must be configured in
Setup
Network Setup
SMTP (Email).
See
Configuring SMTP (Email) Settings
13.
To take a snapshot when an event is detected, select the
Snapshot
check box.
Note
For the snapshot to be attached to the email notification, the
Attachment
check box must be selected in
Setup
Network
Setup
SMTP (Email)
Configuring SMTP (Email) Settings
on
page
14.
Click
Save
to apply the settings.
Report
Go to
Setup
Video Analytics
People Counting
Report
.
