CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
Information for general use
Rev. M / 73023639
217
GasLab Q2
If you wish to view a calculated value, for example the inferior calorific value, you can display all three
different states of the gas (completely dry/completely wet/partly wet).
When you have dragged the required values from the right-hand window into the center, simply click
on “
Poll
” and you will see values updated every second while the button changes to “
Suspend
”. If
you click on “
Snapshot
”, the current value will be frozen and can be viewed in a new
table sheet
created at the same time.
Figure 8.51: Snapshot tab
If you click on “
Full precision
”, the display of the values will be extended to all the existing decimals.
If you click on “
Remove all
”, the display window in the center will be cleared. Other examples include
the following:
•
Use as “Device monitor”
to obtain information about the operating hours and
battery charge and the CPU and RAM load. These data can be opened if the
expor
t values from “
Device status
” are used in the tab.
•
Use as “Time Service display”
to provide information about the time setting
and events and data linked to it. This information can be opened if the export
values from “
Time service
” are used.
Details are given in the next sections.