Honeywell FS20X Series, Руководство пользователя

Страница: 10 / 48

10
FS20X Fire and Flame Detectors
Features and Benefits
● Selectable sensitivity (four settings)
User can set the detector to any of four detection distances (see
“Configuring
the Detector” on page 31 ).
● Selectable relay options
User-configurable for a variety of dry contact relay interface options (see
“Configuring the Detector” on page 31 ).
● Selectable 4 – 20 mA output
Source or sink output options (see
“Configuring the Detector” on page 31 ).
● Selectable communications
Configurable for analog or digital communication outputs such as ModBus (see
“Configuring the Detector” on page 31 ).
● Selectable digital communication address
The user can select a unique 7-bit code (128 addresses, see
“Configuring the
Detector” on page 31 ).
● Lower power consumption
Requires smaller external power supplies and fewer system backup batteries.
● Multiple microprocessors
Reduces the number of discrete detector components, provides larger
programming and memory capacity, and provides redundant self-checking.
● Wider range of applications
Primary applications include long range, fast response to fires such as
acetylene, silane, hydrogen, etc.
● Wider operating temperatures
-40°F to +185°F (-40°C to +85°C) standard
● Built-in automatic “through-the-window” self-test
Monitors window obscuration and checks the operation of the detector’s sensor
array and electro-optical electronics module with built-in IR and UV self-tests.
● Anodized removable aluminum detector module
Rugged, superior protection against EMI/RFI and handling plus simple field
installation and replacement.
● Three bright LEDs (red, yellow, green)
Field status indicators with individual LEDs for alarm, fault, and normal
conditions. Provides superior detector status viewing in bright outdoor
environments (see “Fault Conditions” on page 36 ).
● Windows-based PC interface
User can perform remote FS20X Detector diagnostics, real-time status,
Real-Time Graphing (RTG™), SnapShot™ data recording, and downloading
FirePics™ with Honeywell Analytics’ exclusive FSIM-2 USB Interface Unit and
easy-to-use Windows-based PC Software.
● Designed to detect both hydrocarbon and non-hydrocarbon fires with a single
FSX™ detector
All fire and flame threats are sensed, not just hydrocarbon fires as with other
triple IR flame detectors.
● FM 3260 approved
Third-party tested and certified for industrial and commercial applications.
● Designed, manufactured, and tested by Honeywell Analytics
Over thirty years of proven fire/flame detection product excellence worldwide.