Overview
1
EN2B-0205
Overview
For your information
Technical terms are explained in the glossary (Page 12). They are identified in the text by an asterisk (*).
Application
The ZAPP handheld is used to send commands to the ZAPP receiver*. The ZAPP receiver* then forwards
these commands to devices on the L
ON
W
ORKS
®
network*. The ZAPP receiver* is able to receive data from
up to eight ZAPP handhelds. It is possible to:
•
submit occupancy status
•
change setpoint offset* (temperature)
•
adjust fanspeed
•
bring up or down sunblinds
•
switch on, switch off, or dim lights
•
switch on, switch off, or adjust switchgears* (second light)
•
change and enable officestyles*