Honeywell EQUIP Series, Руководство по установке и настройке

Страница: 68 / 148

48
Configuring Dome Control
Press Y (yes) to continue, or press N (no) to cancel.
Setting Auto Focus
Auto focus causes the lens to remain in focus when using zoom and/or pan and
tilt functions. The following auto focus settings are available:
• Z: The camera focuses automatically when the zoom setting changes.
• PTZ: The camera focuses automatically when using PTZ functions.
• OFF : The focus is operated manually using the controller.
To set auto focus:
1. From the OSD main menu, press 3 to select Control Options .
2. Press 6 to set auto focus to Z (default), PTZ , or OFF .
To set preset auto focus and preset tour auto focus, see Setting Preset Auto
Focus on page 56 and Setting Preset Tour Auto Focus on page 60 .
Setting Timed Auto Focus
You can set the camera to focus automatically at regular intervals of either 20,
30, 60, 120, 300, or 600 seconds.
To set timed auto focus:
1. From the OSD main menu, press 3 to select Control Options .
2. Press 9 to set timed auto focus to OFF (default), 20 , 30 , 60 , 120 , 300 , or
600 .