Honeywell EQUIP Series, Руководство по установке и настройке

Страница: 46 / 148

26
Preparing to Configure the Dome
Logging On to the Honeywell IP Utility
You can log on to the Honeywell IP Utility as an administrator or as a guest.
To log on to the Honeywell IP Utility:
1. On the desktop, double-click the Honeywell IP Utility icon .
The Honeywell IP Utility Log On window opens.
Figure 4-1 Honeywell IP Utility Log On Window
2. In the User Name box, select Administrator or Guest .
3. In the Password box, type the password (case-sensitive), and then click .
• The default administrator password is 1234 . Only one administrator can
be logged on at a time.
• The default guest password is guest . Up to four guests can be logged
on at the same time.
Note When logging on for the first time, log on as an administrator.
An administrator can:
• View the list of available
devices on the network
• Connect to any device
• Configure IP network settings
• Upgrade firmware
• Change passwords
A guest can:
• View the list of available
devices on the network
• View system settings, including
device name, IP address, and
MAC address