Honeywell EQUIP HD4DIP, Справочное руководство, Страница: 59 / 82

HD4DIP Network Camera V2.1 Reference Guide
Document 800-04191 Rev A 59
06/09
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Configuring Video Compression
The video signal sent to the Web-Client from the camera has a number of settings that can
be edited which affect the video as it’s displayed in the Web-Client. The Compression
Settings view enables you to configure these settings:
• Resolution
• Frame Rate
• Priority (Quality or Bite Rate)
• Picture Quality (if Quality is chosen as the priority)
• Target Bit Rate (if Bit Rate is chosen as the priority)
• Maximum Bit Rate that the camera will provide across the network
• GOP (number of frames)
1. On the Compression Settings tab, in the Statistics area, select the Received check
box to receive the bit rate and frame rates for the current image in real time.
Deselecting the check box disables the refresh rate.
Table 5-2 White Balance Settings
Option Description
ATW (Auto Trace White
Balance Mode) Feedback system that automatically aligns the white
balance (2800°K to 8000°K).
User Fixed Preset (4700°K)
AWC Auto (Auto White
Balance Control Mode) Performs faster action than ATW mode without an operating
range. When set to Auto, AWC operates all the time.
Fluorescent For office environments with fluorescent or tungsten
lighting. Provides the lowest dynamic range of all presets
(4200°K).
MWB (Manual Mode) Manual white balance mode. Set the Red and Blue gains
from 0–255.
Indoor General indoor scenes preset (3200°K).
AWC Manual (Auto White
Balance Control Mode) Operates AWC mode manually. When the AWC operation
starts, click Lock to set the present scene’s white balance.
Outdoor Preset for outside environments and high-contrast scenes
where the camera is focused on the darker areas (6300°K).