Honeywell enCore FC1, Руководство по эксплуатации

Страница: 25 / 133

4 Safety
enCore FC Operating Instructions Page 25 of 120
For a description of the process boards

refer to chapter 5.5
Available Process Boards (p. 40).
4.2 Intended Use
The enCore FC device is designed and constructed exclusively for its
intended use as described here.
All enCore FC devices are process computer which process information on
the externally connected measurement devices and signal sensors.
The specific intended use varies according to device type:
• enCore FC1
The FC1 is mainly used for (fiscal) gas measurement. In this case,
the main task of the device is to convert the gas volume measured
at the measurement conditions to base conditions (volume
conversion). Moreover, the corresponding thermal energy and
mass can be calculated. The measured and/or calculated data can
be recorded and monitored.
The FC1 can also carry out other functions and calculations
depending on the scope of application (e.g. volume or mass flow
conversion for liquids).
Moreover, the FC1 can also be used to measure, record and
monitor other process signals.
• enCore MC1
The MC1 is a process computer, which processes the information
from the connected external measurement devices and signal
sensors. This device type is mainly used in industrial gas measure-
ment. The main tasks of the device are monitoring and controlling
processes. The measured and/or calculated data can be recorded
and archived.