Honeywell Dolphin Power Tools Скачать руководство пользователя страница 29

Страница: 29 / 176

2 - 13

Key Types

When a key is selected, its properties display in the Status bar.

Note: Locked and Read Only properties are not recursive. Properties are applied to each individual key. Only text

that appears in blue can be modified.

Saving to the Device

You can save EXM files directly to the terminal when there is an ActiveSync connection between the
terminal and the workstation. Select

File

Save to the Device As

and the Save Remote File window

opens.

Select the location on the terminal where you want to store the file and click

. The file is downloaded

directly to the terminal via ActiveSync.

Note: EXM files for Dolphin Power Tools must be stored in the

\IPSM

(

\Honeywell

for 6100/6500) folder.

Lock Type

Status Bar
Indicator

Description

Effect

Name Lock

Keys are locked by the
section.

• Name and Description cannot be

modified.

• Keys cannot be added, moved, or

deleted within the section.

The key name is locked
individually.

• Name and Description cannot be

modified.

• These keys can be moved.

Read Only

Read-only keys cannot be
modified in any way. They
appear in red.

• Name, Description, and Value cannot be

modified.

• Keys cannot be added, moved, or

deleted within the section.

Encrypted

Key’s value appears as
asterisks (*) for added
security.

Note: Encrypted keys are also stored

encrypted in the EXM file. If you open
the EXM file in a text editor, you won't
see the data as clear text.

Содержание Dolphin Power Tools

















































































































































































Результаты поиска

Содержание Dolphin Power Tools

Отзывы:

Бренды по названию

Популярные бренды

Honeywell Dolphin Power Tools, Руководство пользователя

Результаты поиска

Содержание Dolphin Power Tools

Отзывы:

Бренды по названию

Популярные бренды