Honeywell Dolphin CN80G, Руководство пользователя

Страница: 89 / 112

Dolphin CN80 Mobile Computer 79
Configure Proxy Settings for a Wi-Fi Network
If you need to connect to network resources through a proxy server, you can
configure settings for the proxy server for each Wi-Fi network you add. By default,
the Wi-Fi networks you add are not configured to connect through a proxy server.
Note: Proxy settings apply only to the Wi-Fi network you modify. You must change proxy
settings for each network requiring a proxy server.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & Internet > Wi-Fi . The list of available Wi-Fi
networks appears.
3. Tap and hold the name of a connected network, and then tap Modify network .
4. Tap Advanced options .
5. Under Proxy, tap None to open menu, and then select Manual .
6. Enter the proxy settings for the network.
7. Tap Save .
Disable Wi-Fi Notifications and Set WLAN Radio Sleep Parameter
By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Networks & Internet > Wi-Fi . Verify the WLAN radio is
turned On.
3. Navigate to the bottom of the discovered network list.
4. Select Wi-Fi preferences .
5. Tap Open network notification to toggle the setting On or Off.
Connect to an Ethernet Network
To connect the computer to an Ethernet network, you need a CN80 Ethernet Home
Base or a CN80 Net Base.
1. Make sure the base is connected to your Ethernet network.
2. Place the computer in the base.
3. Swipe up from the bottom of the Home screen to access all apps.
4. Tap Settings > Network & Internet > Ethernet . The Ethernet setting is
turned On by default.
5. Tap Ethernet .