Honeywell Dolphin 70e Black, Руководство пользователя

Страница: 34 / 184

2 - 16
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
Replacing the Battery in Terminals Not Equipped with a Battery Door Lock
The following instructions are relevant for Dolphin 70e Black terminals equipped with battery retention
strap. If your Dolphin 70e Black terminal does not have a retention strap but it does have battery door
lock, refer to the instructions on page
2-15 .
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
Note: The following illustrations depict a standard battery with a standard battery door; however, battery removal/
installation procedures are the same for the extended battery and battery door.
1. Press the Power button to place the terminal in Suspend mode.
2. Remove the battery door and release the battery retention strap.
3. Push the battery door latch back to remove the battery. Do not pull on the battery the retention
strap when attempting to remove the battery .
!
!