Honeywell DOLPHIN 6100 Скачать руководство пользователя страница 11

Страница: 11 / 104

2 - 1

Getting Started

Out of the Box

Verify that your carton contains the following items:
• Dolphin 6100 mobile computer (the terminal)
• Main battery pack (3.7v, Li-Ion)
• AC power supply
• Localized plug adapters

Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see

Customer Support

on page

12-1.

Step 1. Install the Main Battery

The Dolphin 6100 is shipped with the battery packaged separate from the unit. Follow the steps below to
install the main battery.
1.

Release the strap making it convenient to reach the cover.

Remove the battery compartment cover by turning the cover’s locks upward and removing the
cover.

Insert the battery into the battery well with the labels facing upward.

Replace the cover with a hinging motion and turn the locks downwards.

Note: The battery door must be installed prior to booting the unit.

Replace the hand strap.

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not

covered by the warranty.

Cover Locks

Main Battery

Содержание DOLPHIN 6100









































































































Результаты поиска

Содержание DOLPHIN 6100

Отзывы:

Honeywell DOLPHIN 6100, Руководство пользователя, Страница: 11 / 104

Результаты поиска

Содержание DOLPHIN 6100

Отзывы: