DG..T · Edition 01.22
EN-5
NC
1
COM
3
NO
NO 2
N
NO
2
NC
1
COM
3
L1
N
NC
1
COM
3
NO
NC
2
N
NO
2
NC
1
COM
3
L1
N
9.2 Red/green pilot LeD for 24 V DC/AC or for
110 V AC to 230 V AC
24 V DC, I = 16 mA; 24 V AC, I = 8 mA, Order No.:
74921089.
110 V AC to 230 V AC, Order No.: 74923275.
1
2
3
4
NC
1
COM
3
NO
2
N
NO
2
1 NC
3 COM
+
–
9.3 Further accessories
Further information about accessories can be found in
Technical Information bulletin DG (identical to DG..T)
10 teCHnICAL DAtA
10.1 safety information
Safety information, see Safety manual DG (identical
to DG..T) – www.docuthek.com.
10.2 Ambient conditions
Maximum medium and ambient temperatures:
DG:-40 to +140°F (-40 to +60°C).
DG..S: 5 to +140°F (-15 to +60°C).
Long-term use in the upper ambient temperature
range accelerates the ageing of the elastomer ma-
terials and reduces the service life (please contact
manufacturer).
The set switching point may palpably change in media
and ambient temperatures below -22°F (-30°C).
Transport temperature = ambient temperature.
Storage temperature: -4 to +104°F (-20 to +40°C).
Enclosure: IP 65.
This unit is not suitable for cleaning with a high-pres-
sure cleaner and/or cleaning products.
10.3 Mechanical data
Gas types: natural gas, town gas, LPG (gaseous),
flue gas, biogas (max. 0.1 %-by-vol. H
2
S) and air..
Max. inlet pressure p
max.
= withstand pressure:
8.5 psi (600 mbar).
Max. test pressure for testing the entire system:
temporarily (< 15 minutes) 29 psi (2 bar).
Diaphragm pressure switch, silicone-free.
Diaphragm: DG: NBR, DG..S: IIR.
Housing: glass fibre reinforced PBT plastic with low
gas release.
Lower housing section: AlSi 12.
Weight: 9.5 to 11.3 oz (270 to 320 g).
Recommended tightening torque:
Component
tightening
torque
[ncm]
Cover screws
65
½" NPT conduit
170 (15 lb")
Rp 1/8 pipe connection on
aluminium lower section
250
Rp 1/4 connection (1/4” NPT) on
aluminium lower section
1300
Rp 1/8 connection on upper
housing section
250
Clamping terminal screws
80
2.76"
(70)
½" NPT Conduit
0.43"
(11)
