35
SMB System C
Handling
Steel Mesh Barrier Adjuster 3224
Lifting
1. Position the Steel Mesh Barrier
Adjuster on the Safety Post.
Insert the locking pin in an appropriate
hole to give a good ergonomical
working height for the lever.
2. Hook the hook into the eye on the
Steel Mesh Barrier Holder and tighten
the strap so that the lever points
downwards in a suitable position to
lift from.
3. Hold the lever on the Steel Mesh
Barrier Adjuster with one hand and
loosen the screw to the Steel Mesh
Barrier Holder with your other hand.
Only loosen the screw approximately
1 turn so that the Steel Mesh Barrier
just becomes loose. Lift the lever so
that the Steel Mesh Barrier is raised to
the required position.
Note
The maximum lift height is approximately 20 cm for each lift. Make an
additional lift if the Steel Mesh Barrier needs to be raised further.
WARNING!
Always hold the lever when the Steel Mesh Barrier Holder
screw is loosened.
