24
Data
SMB System C
WARNING!
Should you increase the effective area of the edge
protection, for example by using scaffold sheeting or
plywood, the load at a given wind strength will increase.
Never make changes without first checking that the
permitted wind velocity pressure is not exceeded.
Ice and snow
The temporary edge protection system is not designed for
exposure to static or dynamic loads resulting from ice and
snow. Always keep edge protection free from ice and snow.
Assembly
Fastening
Methods to secure the attachments to the building
structure, refer to relevant TI sheets. Loads in TI sheets are
design loads, including the partial safety factor
γ
F = 1,5.
Important
Evaluate all forces affecting the fixings and the building
structure.
Fasteners
Always follow the manufacturer’s instructions for the
selection and installation of all fixings and anchors.
Note
It is important to take into consideration concrete or timber quality, and
the distance to edges between fixings etc. aspects that might affect
strength.
Safety Posts
General
1. Insert the Safety Post in the attachment with the
guardrail holders facing inwards.
2. Push the Safety Post down into the attachment, Cloxy
automatically locks in the hole on the attachment.
