Honeywell CNI4, Быстрый старт

Страница: 8 / 8

CNI4 Quick Start Guide 8
6. Navigate to View/Edit > Configure by Group > Radio Configuration, and set the following
parameters.
Item No. Description Verizon
Non-Verizon
3071 Verizon enable 1 = Enable 0 = Disable
3016 Fetch Radio
Parameters
1 = Set 1 = Set
3021 ModemIPType 2 = IPv4v6 0 = IPv4
3022 Packet service
Connection
command
ATD*99***3# ATD*99#
3064 Manual APN
Enable
1 = Enable 1 = Enable
3023 APN Name Provided by
Verizon
Example for
AT&T: 12221.mcs
7. Cloud Link must be externally powered and modem session timeout must be
configured to 180 seconds if
MiWireless mode is enabled.
Item No. Description Recommended Value
3142 MiWireless Enable 1 = Enable
3028 Modem session timeout 180 seconds
8. Disconnect MasterLink.
9. Power cycle the CNI4.
Step 7: Restore the original serial cable connection
1. Disconnect the USB to serial cable (40-6147-kit).
2. Restore the original serial interface between the Pulse Accumulator and the Cloud Link
4G Modem.
Step 8: Close and lock the door