background image

10

‘Efficient Daily Use’

 

PROGRAMMING THE CM727

Modifying the Heating Program

To change the heating program:
a.

 

Press  either  of  the 

PROGRAM

 

  or 

  buttons  to 

enter the programming mode. The time / temperature 

settings  for  period 

1

  on  Monday  (Day  1)  will  be 

flashing as shown. The active period is highlighted by 

a flashing square around the numbers at the bottom of 

the screen and the selected day is shown with the day 

indicator.

b.

 

To adjust the period start time use the 

 

 or   buttons, the ‘OK?’ indicator will be displayed to 

confirm the change. Holding the button down will change the time quickly.

 

Note:

 If you are pressing the     or   buttons and the display flashes the next period, it 

means the next period will be pushed forward.

c.

  Once the required time is reached press the green 

 button to confirm.

 

Note: 

If the original time setting did not require adjustment press the green 

 button to move 

to step 

‘d’

.

d.

  The temperature setting for period 

1

 on Monday (Day 1) will now be flashing. To adjust this 

press the 

 

 or   buttons and confirm the setting again by pressing the green 

 button.

e.

  The next time and temperature period will now be active. Adjust this by repeating steps b - d 

above until all 4 periods are set for Monday or press the 

AUTO 

button to run the program as 

set, at any time.

You now have a choice of how to set the program for the next day:

1

2

3

4

5

6

7

4

3

2

1

The Built-in Heating Program

The built-in heating program has 4 temperature level changes per day that can be set between 

3.00am and 2.50am the following day - allowing you to maintain the evening temperature after 

midnight.  Each  temperature  level  can  be  set  between  5°C  and  35°C,  and  adjusted  in  0.5°C 

increments. The factory default program for heating is as follows.

Reviewing the Heating Program

To review or edit the heating program use the 

PROGRAM

 

 or 

 buttons to navigate between the 

4 individual programming periods for that day. Use the 

DATE/DAY 

button to step through each day of 

the week, so the complete 7 day heating program can be reviewed or edited.

Period 

Time

 

6:30 

8:00 

18:00 

22:30

Temperature

 

21°C 

18°C 

21°C 

16°C

Monday to Friday

 

(Day 1 to 5)

Period 

Time

 

8:00 

10:00 

18:00 

23:00

Temperature

 

21°C 

21°C 

21°C 

16°C

Saturday & Sunday

 

(Day 6 & 7)

Содержание CM721
















Отзывы: