Honeywell CGW-MB Скачать руководство пользователя страница 31

Страница: 31 / 187

CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022

Honeywell CLSS Alarm Transmission Services

Configurations

Install a Fixed CLSS Gateway mainboard at the Site

To enable central station communications, a CGW-MB must be installed.

1. Log into the

Connected Life Safety Services

App in your mobile device.

2. Tap the three horizontal dots icon at the top-right side on the

All Customers

dashboard.

3. Select

Install Fixed CLSS Gateway mainboard

from the pop-up menu.

4. Follow the on-screen instructions to complete the CLSS Gateway mainboard

installation in the App.

Configuring the Central Station Communication

A technician or a service provider administrator can configure the central station
communication of the CGW-MB.
1. Log onto the CLSS Site Manager.
2. Select the customer from the

All Customers

list at the top-left side.

3. Select the customer, select the site, and then select the building requiring alarm

transmission.

4. Click the

FEATURE ACTIVATION

icon at the left navigation bar.

5. Select

Installed CLSS Gateway mainboards

and then go to the

INSTALLED CLSS

Gateway mainboardS

section.

NOTE:

You can skip this procedure if you are activating the central station

communication for a CGW-MB that is already installed.

ALL CUSTOMERS LIST

THE FEATURE ACTIVATION ICON

NOTE:

To view only those CLSS Gateway mainboards not yet activated, select

Show only

CLSS Gateway mainboards without activations

at the right side.

Содержание CGW-MB




























































































































































































Результаты поиска

Содержание CGW-MB

Отзывы:

Honeywell CGW-MB, Инструкция по установке и эксплуатации, Страница: 31 / 187

Результаты поиска

Содержание CGW-MB

Отзывы: