manualshive.com logo in svg

Honeywell CF3680, Руководство пользователя, Страница: 126 / 203

Поделиться
Скачать
Honeywell CF3680 Скачать руководство пользователя страница 126

110

N3680 Decoded Engine User Guide

If 

GS1-128 Emulation

 is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13) 

are expanded out to 16 digits. If the AIM ID is enabled, the value will be the GS1-
128 AIM ID, ]C1 (see 

Symbology Charts

 on page 171).

If 

GS1 DataBar Emulation

 is scanned, all retail codes (U.P.C., UPC-E, EAN8, 

EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will be the 
GS1-DataBar AIM ID, ]e

m

 (see 

Symbology Charts

 on page 171).

If 

GS1 Code Expansion Off

 is scanned, retail code expansion is disabled, and UPC-

E expansion is controlled by the 

UPC-E0 Expand

 (page 95) setting. If the AIM ID is 

enabled, the value will be the GS1-128 AIM ID, ]C1 (see 

Symbology Charts

 on page 

171).

If 

EAN8 to EAN13 Conversion

 is scanned, all EAN8 bar codes are converted to 

EAN13 format. 

Default = GS1 Emulation Off

.

TCIF Linked Code 39 (TLC39)

This code is a composite code since it has a Code 39 linear component and a 
MicroPDF417 stacked code component. All bar code readers are capable of read-
ing the Code 39 linear component. The MicroPDF417 component can only be 
decoded if TLC39 On is selected. The linear component may be decoded as Code 
39 even if TLC39 is off. 

Default = Off.

 

GS1-128 Emulation

GS1 DataBar Emulation

GS1 Code Expansion Off

EAN8 to EAN13 Conversion

* GS1 Emulation Off

On

Содержание CF3680












































































































































































































Отзывы:

Нет отзывов