manualshive.com logo in svg

Honeywell Captuvo Series, Руководство пользователя

Поделиться
Скачать
Honeywell Captuvo Series Скачать руководство пользователя страница 93

5 - 45

GS1 Emulation

The sled can automatically format the output from any GS1 data carrier to emu-
late what would be encoded in an equivalent GS1-128 or GS1 DataBar  symbol.  
GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8, ITF-14, 
GS1-128, and GS1-128 DataBar and GS1 Composites.  (Any application that 
accepts GS1 data can be simplified since it only needs to recognize one data 
carrier type.)

If 

GS1-128 Emulation

 is scanned, all retail codes (U.P.C., UPC-E, EAN8, 

EAN13) are expanded out to 16 digits.  If the AIM ID is enabled, the value will be 
the GS1-128 AIM ID, ]C1 (see 

Symbology Chart

 on page A-1).

If 

GS1 DataBar Emulation

 is scanned, all retail codes (U.P.C., UPC-E, EAN8, 

EAN13) are expanded out to 16 digits.  If the AIM ID is enabled, the value will be 
the GS1-DataBar AIM ID, ]e

m (see 

Symbology Chart

 on page A-1).

If 

GS1 Code Expansion Off

 is scanned, retail code expansion is disabled, and 

UPC-E expansion is controlled by the 

UPC-E0 Expand

 (page 5-27) setting.  If 

the AIM ID is enabled, the value will be the GS1-128 AIM ID, ]C1 (see 

Symbology Chart

 on page A-1).

If 

EAN8 to EAN13 Conversion

 is scanned, all EAN8 bar codes are converted 

to EAN13 format.  

Default = GS1 Emulation Off.

GS1 DataBar Emulation

GS1-128 Emulation

* GS1 Emulation Off

GS1 Code Expansion Off

EAN8 to EAN13 Conversion

Содержание Captuvo Series





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды