manualshive.com logo in svg

Honeywell Captuvo Series, Руководство пользователя

Поделиться
Скачать
Honeywell Captuvo Series Скачать руководство пользователя страница 13

1 - 1

1

Getting Started

Introduction

The Captuvo SL22 Enterprise Sled is compatible with the Apple

®

 iPod touch

®

 

(4th generation) mobile digital device and includes an integrated imager for 
scanning all types of bar codes. You have the capability to configure the scan 
engine in the sled using the programming bar codes included in this user’s 
guide; however, the application being used might override the settings you have 
programmed.  An optional magnetic stripe reader (MSR) for reading cards with 
magnetic stripes is available.

Out of the Box

Verify that the box contains the following items:

•

Captuvo SL22 Enterprise Sled

•

Charger

•

Quick Start Guide

Note: If you ordered accessories for your sled, verify that they are also included 

with the order.

Be sure to keep the original packaging in case you need to return the sled for 
service.

Note: Honeywell is not an authorized Apple repair center.  Please return only 

your sled to us for repair.  Honeywell is not liable for any non-Honeywell 
product shipped to our repair center.

Note: Refer to your Apple iPod touch documentation for important product and 

safety information.

Содержание Captuvo Series





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды