Honeywell BendixKing AV8OR 3D, Руководство пользователя

Страница: 14 / 78

DRAFT
Activating Your XM Satellite Receiver
2
AV8OR 3D User Guide
Activating Your XM Satellite Receiver
Note: Prior to connecting the weather receiver, you must subscribe to an XM Aviator or
Aviator Lite service. Call XM Satellite at (800) 985-9200 for more information.
1. Turn on the INU and XM weather receivers with the antenna visible to
satellites.
2. Call XM Satellite and activate your subscription.
The unit must be turned on and the antenna visible to the sky for the receiver
to activate.
Note: If you have already activated your subscription but are unable to activate
your receiver, you may need to call XM Satellite and ask them to send a new
activation signal. The XM activation phone number is (800) 967-2346.
3. Wait for the XM weather receiver to be activated from an XM satellite. (It may
take from several minutes to up to 1 hour to retrieve the activation signal.)
4. Press the Menu button to display the menu items on the left side of the screen.
5. Press the Cfg button to enter the Setup dialog.
6. Select the XM info tab.
7. In the connection section, press the Start button and wait until you see the
radio signal status field switch to “Active” and the activation info is updated
with the radio serial number. If the service level field is not updated with
your subscription level, press the Activate button.
8. After being activated, your XM weather receiver will transmit the weather
data to
AV8OR 3D
. The section “XM Information” on page 61 provides infor-
mation about the quality of the signal.