Honeywell Avanza SE.40B1, Руководство пользователя

Страница: 31 / 35

SE.40B1 User Manual
30
When choosing this option, you will need to select how long you prefer the
TV to remain on after you power down the host device (60, 120, or 300
seconds). This is for your convenience as you may inadvertently turn off
the host device, or you may wish to keep the TV on for example, when
rebooting a computer.
NOTE: As the Fast Wake option uses nominal power, you may choose to
keep DPMS in the OFF position for increased Energy Savings.
NO SIGNAL POWER OFF
This TV monitors whether or not there is an incoming signal. If it senses
no signal for a period of 10 minutes, it will shut off to conserve energy.
Available settings are ON/OFF.
NO OPERATION POWER OFF
This TV monitors whether or not it receives any operational command,
such as through the remote control or through the command buttons on the
TV. If it does not receive any commands within a 3 hour period, it will shut
off to conserve energy. Available settings are ON/OFF. A pop up notification
will appear on the screen if the 3 hour period is about to expire. To avoid
auto power off, press any button on the remote to resume use.
POWER ON PLUG
Provides a convenience option should you plug your TV into a power strip
(recommended). When the checkmark is selected in the menu, the TV will
turn on when the power strip is turned on. You may opt to turn on the TV
independently from the power strip, or you may not use a power strip, in
which case you would uncheck the setting in the menu.
RESET
Resets all menu settings to the factory default. A warning screen will ap-
pear to confirm.