Honeywell A700, Справочник по аппаратуре, Страница: 86 / 334

The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\China Post]
Registry Key
Default
Value
A730 A730x Description
ChinaPostActivation 0 X
ü
Enables the symbology.
ChinaPostBarCodeLengthL1 0x04 X
ü
Length value L1. Range is 0x0 to 0xFF
(0 to 255).
ChinaPostBarCodeLengthL2 0x00 X
ü
Length value L2. Range is 0x0 to 0xFF
(0 to 255).
ChinaPostBarCodeLengthL3 0x00 X
ü
Length value L3. Range is 0x0 to 0xFF
(0 to 255).
ChinaPostBarCodeLengthMode 0 X
ü
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths" – Not
supported on A730x,
2 = "L1 is min, L2 is max length".
ChinaPostCodeMark 0x2A X
ü
A single character inserted before the
bar code data to indicate the
symbology.
ChinaPostUDSI P8 X
ü
User-defined symbology identifier.
Range is 0-4 characters.
Korea Post
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Korea Post]
Registry Key
Default
Value
A730 A730x Description
KoreaPostActivation 0 X
ü
Enables the symbology.
Voice Device and Headset Hardware Reference Guide 64