Honeywell A700, Справочник по аппаратуре, Страница: 79 / 334

Registry Key
Default
Value
A730 A730x Description
TLC39Activation 0x0
ü ü
Enables the TLC 39 symbology
(requires Micro PDF417 and Code
39 to be enabled as well).
TLC39
LinearOnlyTransmissionMode
0x0
ü
X
Ignores Micro PDF417 data and
only transmits the Code 39
portion.
TLC39ECISecurity 0xa
ü
X
Selects how much time is spent
looking an ECI number if the Code
39 portion of the label is 6 digits.
Range is 0x0 - 0x64 (0 to 100),
where 0x0 is fastest.
TLC39CodeMark 0x2a
ü ü
A single character inserted before
the barcode data to indicate the
symbology.
TLC39UDSI H0
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
GS1 DataBar
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\GS1 DataBar]
Registry Key
Default
Value
A730 A730x Description
DatabarOmniDirectionalActivation 0x0
ü
X *
Enables the DataBar
Omnidirectional/RSS 14 symbology.
DatabarLimitedActivation 0x0
ü
X *
Enables the DataBar Limited/RSS
Limited symbology.
DatabarExpandedActivation 0x0
ü
X *
Enables the DataBar Expanded/RSS
Expanded symbology
57 Voice Device and Headset Hardware Reference Guide