Honeywell A700, Справочник по аппаратуре, Страница: 71 / 334

Registry Key
Default
Value
A730 A730x Description
PlesseyActivation 0x0
ü ü
Enables the Plessey symbology.
PlesseyUnconventionalStop 0x0
ü ü
Not documented.
PlesseyCodeMark 0x44
ü ü
A single character inserted before the
barcode data to indicate the
symbology.
PlesseyBarCodeLengthL1 0x0
ü ü
Length value L1. Range is 0x0 to 0xFF
(0 to 255).
PlesseyBarCodeLengthL2 0x0
ü ü
Length value L2. Range is 0x0 to 0xFF
(0 to 255).
PlesseyBarCodeLengthL3 0x0
ü ü
Length value L3. Range is 0x0 to 0xFF
(0 to 255).
PlesseyBarCodeLengthMode 0x0
ü ü
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths" – Not
supported on A730x,
2 = "L1 is min, L2 is max length".
PlesseyCheckDigitTransmission 0x0
ü ü
Enable transmission of the check digit.
PlesseyUDSI C2
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
Standard 2 of 5
Support for the parameters in the table is labeled as follows:
ü = Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Standard 2 of 5]
49 Voice Device and Headset Hardware Reference Guide