Honeywell A700 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 334

Honeywell A700 Скачать руководство пользователя страница 37

1. Hold the Talkman so that the battery compartment is facing up.
2. Hold the battery with the rounded side up.
3. Place the battery in at an angle, pins end first.
4. Push the back of the battery into place.

You will hear a click when the battery is in place.

CAUTION
Do not force the battery into the compartment. You may damage the battery or the
device. If the battery does not snap easily into place, reposition the battery in the
compartment and try again.

Make sure the battery is firmly in place and can't be removed without pressing the battery release
button.

WARNING
Replace a battery only with another battery that has been authorized by Honeywell for the
product you are using. Use of an unqualified battery may present a risk of fire, explosion,
leakage, or other hazard. See also

Honeywell Battery Safety

Removing a Battery from a Talkman A700/A700x Device

Make sure the Talkman device is off.

CAUTION
Do not remove the battery until the LED indicator is off. If you remove the battery when the
device is on or sleeping, any data collected could be lost.

1. Hold the device in one hand.

15

Voice Device and Headset Hardware Reference Guide

«
...
35
36
37
38
39
...
»

Содержание A700















































































































































































































































































































































Отзывы:

Нет отзывов