Honeywell A700 Скачать руководство пользователя страница 130 | Manualshive

Страница: 130 / 334

Honeywell A700 Скачать руководство пользователя страница 130

1. Using VoiceConsole, edit the task package that is being used.
2. Set the parameter AutoOperatorLoadEnable to zero (0).
3. Save your changes and load the modified task package onto the devices. See VoiceConsole

Help for detailed steps.

4. Operators must use the Plus (+) or Minus (—) buttons to scroll through the list of operators

to load their voice profiles.

SRX2/SRX3 Headset Compatibility

SRX3

Honeywell has tested the SRX3 Wireless Headset with the following devices and Vocollect Voice
Software versions. Support and compatibility of the SRX3 headset is not limited to these
products, but the customer assumes risks related to untested configurations.

Device

Vocollect Voice Software

Honeywell Talkman A700x

VoiceCatalyst 4.0 and newer

Honeywell Talkman A700

VoiceCatalyst 2.4 and newer

The SRX3 Headset requires Honeywell Accessory Update utility v3.0 or greater.

SRX2

Honeywell has tested the SRX2 Wireless Headset with the following devices and Vocollect Voice
Software versions. Support and compatibility of the SRX2 headset is not limited to these
products, but the customer assumes risks related to untested configurations.

Device

Vocollect Voice Software

Honeywell Talkman A700x

VoiceCatalyst 4.0 and newer

Honeywell Talkman A700

VoiceClient 3.9 and newer
VoiceCatalyst 2.0 and newer

Windows XP PC and other supported display
terminals

VoiceCatalyst MP for Windows XP 1.0 and
newer

Voice Device and Headset Hardware Reference Guide

108

«
...
128
129
130
131
132
...
»

Содержание A700















































































































































































































































































































































Отзывы:

Нет отзывов