Honeywell Life Safety AS, Postboks 236, 1372 Asker
http://www.hls-nordic.com
290087.1-01
Page 1 from 2
1.
Dismantle the luminaire by sliding the
mounting part as shown in the picture.
5.
Install the indications plastic and connect
the cable to the respective connector as
shown in the picture.
6.
Follow the next steps (page 2) to
complete the installation.
2.
Cut the plastic for cable entry.
3.
Connect the cable to the respective
connector as shown in the picture.
4.
Refer to the installation manual to
complete the electrical connections and
push carefully the electronics back until
the side plastic reaches its original position.
3
5
LUMINAIRE PREPARATION
2
298100.8
290087.1 Recessed Accessory for ExiLED
