Honeywell 26079, Руководство пользователя

Страница: 39 / 50

4 - 5
Profiles
Profiles are one or more settings grouped under one name and are applied to the ring scanner by the application using the
Microsoft POS API (application program interface) ClaimedBarcodeScanner.SetActiveProfileAsync. The ring scanner has
the following built-in profiles:
Advanced Ring Scanner Configuration
You may need to create customized profiles to configure the ring scanner for your application. Some settings are only possible
when using customized profiles (for example setting minimum and maximum bar code length).
Custom Profiles
Customized profiles are defined by the HoneywellDecoderSettingsV2.exm file (available on our website at
www.honeywellaidc.com ). This is an XML file and must be placed on the terminal in either:
• \Documents\Profile
The user must create the Profile folder (accessible by connecting the terminal to a PC with a USB cable).
• \SharedData\Enterprise\Persistent\Profile
This folder is only accessible by an Enterprise signed application.
The file contains several profiles. You can add/delete profiles or change existing profiles by modifying the file using a text
editor such as Notepad. The file can also be created programmatically (using a WE8H application) and saved directly to the
correct location on the terminal.
Note: the HoneywellDecoderSettingsV2.exm file is used for the terminal’s internal scanner and the ring scanner (called
USB scanner in the file). Follow the instructions/examples in the file for the USB scanner to apply settings to the ring
scanner.
Profile Description
HON:Reset Resets all symbology settings to disabled.
HON:GoodReadBeep Enable Enables the scanner driver issued good read beep. When using Scan Demo you
will hear 2 good read beeps: One from the terminal and one issued from the ring
scanner driver.
Available in ScanDemo.
HON:GoodReadBeepDisable Disables the scanner driver issued good read beep. When using Scan Demo this
profile disables the scanner issued good read beep so you will only hear one good
read beep from the terminal.
Available in ScanDemo.
HON:ScanButtonEnable Enables the scanner driver to handle ring scanner trigger press and release
events. When the trigger is pressed, ring scanner scanning is started and the
ClaimBarcodeScanner::TriggerPressed event is called. When the trigger is
released, the ring scanner stops scanning and the
ClaimedBarcodeScanner::TriggerReleased event is called.
Not available in ScanDemo.
HON:ScanButtonDisable Disables the scanner driver in handling ring scanner trigger press and release
events. When the trigger is pressed, only the
ClaimedBarcodeScanner::TriggerPressed event is called. When released, only the
ClaimedBarcodeScanner::TriggerReleased event is called. This allows the
application to handle the trigger events and implement complex trigger modes as
needed.
Not available in ScanDemo.