manualshive.com logo in svg

Honeywell 145*g1D, Руководство пользователя, Страница: 138 / 206

Поделиться
Скачать
Honeywell 145*g1D Скачать руководство пользователя страница 138

7 - 36

QR Code Message Length

Scan the bar codes below to change the message length.  Refer to 

Message Length Description

 (page 7-1) for additional 

information.  Minimum and Maximum lengths = 1-7089.   Minimum Default = 1, Maximum Default = 7089.

QR Code Append

This function allows the scanner to append the data from several QR Code bar codes together before transmitting them to 
the host computer.  When the scanner encounters an QR Code bar code with the append trigger character(s), it buffers the 
number of QR Code bar codes determined by information encoded in those bar codes.  Once the proper number of codes 

is reached, the data is output in the order specified in the bar codes.  

Default = On.

QR Code Page

QR Code pages define the mapping of character codes to characters.  If the data received does not display with the proper 
characters, it may be because the bar code being scanned was created using a  code page that is different from the one the 
host program is expecting.  If this is the case, scan the bar code below, select the code page with which the bar codes were 
created (see 

ISO 2022/ISO 646 Character Replacements

 on page A-7), and scan the value and the 

Save

 bar code from 

the 

Programming Chart

 on the inside the back cover of this manual.  The data characters should then appear properly.

Minimum Message Length

Maximum  Message Length

* On

Off

QR Code Page

Содержание 145*g1D















































































































































































































Отзывы:

Нет отзывов