SiXSIREN
Wireless Siren/Strobe
Installation and Setup Guide
This wireless siren/strobe is intended for use with Honeywell Home controls that support SiX™ series devices.
SiXSIREN
OPEN
Gently twist the top of the Siren counterclockwise and the mounting bracket clockwise to separate them.
OPEN
MOUNTING
The SiXSIREN can be mounted on the wall or on the ceiling.
The rear tamper breakout [
A
] MUST be mounted to a stud, solid wood, or with a robust wall anchor.
After enrolling, verify adequate signal strength by conducting Go/No Go tests (see controller’s instructions) with the device
in its intended mounting location. Adjust the device location and orientation as necessary.
