background image

APPENDIX

A

CN80G Mobile Computer Series User Guide

109

SPECIFICATIONS

Computer Agency Information

CN80G mobile computers meet or exceed the requirements of all applicable 
standards organizations for safe operation. The best way to ensure safe operation 
is to use the mobile computer according to the agency guidelines on the product 
regulatory sheet, quick start guide, and in this user guide. Read all guidelines 
before using your computer. 

Product documentation and public certificated are available for download from 

sps.honeywell.com

Label Locations

Labels inside the battery compartment contain information about the computer 
including, compliance information, model number, serial number, IMEI number 
(CN80L1N models only) and MAC address. Laser safety labeling is located on the 
back of the computer.

Product Identification Numbers 
(e.g., Serial Number, MAC address or IMEI)

Laser Safety Label Location

Laser Safety Label Location

Model CN80L0N or 
CN80L1N with 
N6603ER Imager 

Model CN80L0N with 
EX20 Near/Far Imager

Содержание CN80G Series





























































































































Отзывы: