Honda WX15T, Руководство пользователя

Страница: 47 / 100

5-8
dummyhead dummyhead
FUEL SYSTEM
PILOT SCREW REPLACEMENT
Leave the pilot screw [1] and limiter cap [2] in place
during carburetor cleaning. Remove only if necessary
for carburetor repair.
Removal of the limiter cap requires breaking the pilot
screw. A new pilot screw and limiter cap must be
installed.
Tampering is a violation of Federal and California law.
When the limiter cap has been broken off, remove the
broken pilot screw.
Place the spring on the replacement pilot screw, and
install it on the carburetor.
Turn the pilot screw in until it is lightly seated and then
turn the screw out the required number of turns.
Apply LOCTITE® 638 or equivalent to the inside of the
limiter cap and then install the cap so the stop prevents
the pilot screw from being turned counterclockwise.
Be careful to avoid turning the pilot screw while
installing the limiter cap. The pilot screw must stay at its
required setting.
Standard pilot screw opening 3 turns out
[1]
STOP
[2]
[2]
Pilot screw will break at narrow point.