33
SERVICING YOUR PUMP
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete
draining.
Do not run the pump without priming water. Dry operation will burn the
seal.
1.Place a suitable container below the engine to catch the used oil, and
then remove the oil filler cap, drain plug, and sealing washer.
2.Allow the used oil to drain completely, and then reinstall the drain
plug and a new sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container, and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground, or pour it down the
drain.
3.With the engine in a level position, fill with the recommended oil (see
page 34) to the upper limit of the oil filler neck.
Maximum oil capacity:
WH15XT: 18 oz (0.56 L)
WH20XT: 19 oz (0.58 L)
4.Reinstall the oil filler cap securely.
Wash your hands with soap and water after handling used oil.
OIL FILLER NECK
OIL DRAIN PLUG
SEALING WASHER
(Replace)
OIL FILLER CAP
UPPER LIMIT
OIL FILLER CAP
31YH6600.book 33 ページ ２０１５年１月８日 木曜日 午前１１時５０分
