Servicing Your Honda
124
Front Final Gear Oil
Refer to
Safety Precautions
on page 91.
Check the final gear oil level every 1,800 miles (3,000 km) or 300
hours of operating your Honda SXS and add, if needed.
1. Park your Honda SXS on a firm, level surface.
2. Remove the oil filler cap.
3. Make sure the oil level is at the lower edge of the oil filler
inspection hole.
4. Apply a thin coat of grease to a new O-ring, and insert it into the
oil filler cap groove.
5. Install and tighten oil filler cap to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
Oil Recommendation
API classification
GL-4 or GL-5 except oils labeled as
energy conserving on the circular
API service label
type
hypoid gear oil
viscosity (weight)
SAE 80W-90
suggested oil
Honda shaft drive oil or equivalent
Checking Oil
LEFT FRONT
lower edge of oil filler
inspection hole
oil filler cap
O-ring
19 SXS500M-31HL56400.book 124 ページ 2018年7月31日 火曜日 午後6時6分
Содержание Pioneer SXS500M 2019
