Driving Position Memory System
*1
You can store two driver’s seat (except for
power lumbar), and door mirror positions
with the driving position memory system.
When you unlock and open the driver’s
door with a remote transmitter, door
mirrors adjust to one of the two preset
positions and the seat adjusts to retracted
positions of one of the two preset positions
automatically.
Storing a Position in Memory
1. Adjust the seat, and mirrors to your
preferred positions.
2. Press SET.
3. Press and hold memory button 1 or 2
within 5 seconds of pressing the SET
button.
You will her two beeps when the
memory is set.
4. Press one of the memory buttons to
recall previously stored positions.
Adjusting the Head Restraints
Your vehicle is equipped with head
restraints in all seating positions. Head
restraints are most effective for protection
against whiplash and other rear-impact
crash injuries.
The center of the back of the occupant’s
head should rest against the center of the
restraint. The tops of the occupant’s ears
should be level with the center height of
the restraint.
For a head restraint system to work properly:
• Do not hang any items on the head restraints or from the restraint legs.
• Do not place any objects between an occupant and the seat-back.
*1 - If equipped
VEHICLE CONTROLS
44 |
• Install each restraint in its proper location.
Improperly positioning head restraints reduces their effectiveness and
increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before driving.
n
Adjusting the Front Head Restraints
To raise the head restraint: Pull it
upward.
To lower the head restraint: Push it
down while pressing the release
button.
n
Adjusting the Rear Head Restraints
To raise the head restraint: Pull it upward.
To lower the head restraint: Push it down while pressing the release button.
n
Removing and Reinstalling the Head Restraints
Head restraints can be removed for cleaning or repair.
To remove the
head restraint:
Pull the restraint up as far as it will go. Then push the
release button(s), and pull the restraint up and out.
To reinstall a
head restraint:
Insert the legs back in place, then adjust the head
restraint to an appropriate height while pressing the
release button(s). Pull up on the restraint to make sure it
is locked in position.
Failure to reinstall, or correctly reinstall, the head restraints can result in
severe injury during a crash.
Always replace the head restraints before driving.
Adjusting the Rear Seats
Adjust second row seat, access third row seats, or remove seats for carrying
cargo.
VEHICLE CONTROLS
| 45
