Honda NC700 2012, Руководство по обслуживанию

Страница: 481 / 773

13-4
dummyhead dummyhead
ALTERNATOR/STARTER CLUTCH
SERVICE INFORMATION
GENERAL
• This section covers service of the alternator and starter clutch. All service can be done with the engine installed in the frame.
• For alternator inspection (page 21-9).
• For CKP sensor inspection (page 5-6).
• For starter motor service (page 6-8).
SPECIFICATIONS
Unit: mm (in)
TORQUE VALUES
TROUBLESHOOTING
Starter motor turns, but engine does not turn
• Faulty starter clutch
• Damaged starter reduction gear/shaft
• Damaged starter idle gear/shaft
• Damaged or faulty starter motor pinion gear
• Damaged starter driven gear
ITEM STANDARD SERVICE LIMIT
Starter driven gear boss O.D. 57.749 – 57.768 (2.2736 – 2.2743) 57.73 (2.273)
Starter clutch outer I.D. 74.412 – 74.442 (2.9296 – 2.9308) 74.46 (2.931)
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Flywheel mounting bolt 1 12 157 (16.0, 116) Left hand thread
Apply engine oil to the threads and
seating surface.
Starter clutch socket bolt 6 8 30 (3.1, 22) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
Alternator stator mounting bolt 4 6 10 (1.0, 7) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
Alternator wire clamp bolt 1 6 10 (1.0, 7) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip