Honda NC700 2012, Руководство по обслуживанию

Страница: 101 / 773

2-6
dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
SERVICE INFORMATION
GENERAL
• This section covers removal and installation of the body panels and exhaust system.
• Serious burns may result if the exhaust system is not allowed to cool before components are removed or serviced.
• Always replace the exhaust pipe gasket with new ones after removing the exhaust pipe from the engine.
• When installing the exhaust system, loosely install all of the exhaust pipe fasteners. Always tighten the exhaust pipe joint nuts
first, then tighten the mounting bolts.
• Always inspect the exhaust system for leaks after installation.
TORQUE VALUES
TROUBLESHOOTING
Excessive exhaust noise
• Broken exhaust system
• Exhaust gas leak
Poor performance
• Deformed exhaust system
• Exhaust gas leak
• Clogged muffler
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Seat cowl assembly screw 2 4 0.9 (0.1, 0.7)
Brake/tail/license light mounting
socket bolt 1 6 10 (1.0, 7)
Reflector mounting nut 1 5 1.7 (0.2, 1.3)
Turn signal light mounting screw 4 6 2.5 (0.3, 1.8)
Luggage box lid assembly screw 9 4 0.9 (0.1, 0.7)
Luggage box lid lock plate
mounting screw 2 6 4.0 (0.4, 3.0)
Luggage box lid mounting socket
bolt 3 6 12 (1.2, 9)
Luggage box lid hinge nut 1 6 12 (1.2, 9) U-nut
Gearshift arm pinch bolt
(NC700X/XA/S/SA) 1 6 12 (1.2, 9) ALOC bolt; replace with a new one.
Muffler cover socket bolt 1 6 10 (1.0, 7)
Muffler band bolt 1 8 17.5 (1.8, 13)
Exhaust pipe joint nut 3 8 28 (2.9, 21) See page 2-34
Exhaust pipe stud bolt 3 8 – See page 2-35