Honda Motorcycle & Scooter India Pvt. Ltd.
63
POSITION LIGHT BULB
1. Remove the front cowl (1) by removing
4 screws (2). Carefully hold it from the
lower end.
2. Disconnect the connectors (3).
3. Remove the position light bulb (4) by
pulling it .
4. Install a new bulb in the reverse order
of removal.
BULB REPLACEMENT
Refer to the Safety Precautions on page 40.
The light bulb becomes very hot while the
light is ON, and remain hot for a while after
it is turned OFF. Be sure to let it cool down
before servicing.
• Be sure to turn the ignition switch OFF
when replacing the bulb.
• Do not use bulbs other than those
specified.
• After installing a new bulb, check that
the light operates properly.
(3)
(4)
(2)
(1)
(1) Front cowl
¼ÝaV dkmy½
(2) Screw
¼LØw½
(3) Connector
¼dusDVj½
(4) Position light Bulb
¼iksft”ku ykbZV cYc½
Содержание NAVI 2016
Страница 1: ...NAVI OWNER S MANUAL Honda Motor Co Ltd 2016 ...
Страница 82: ...Honda Motorcycle Scooter India Pvt Ltd 74 ...