Honda legend, Руководство пользователя, Страница: 99 / 611

Indicators in the trip computer show:
The lower segment always shows
the odometer, trip meter and the
outside temperature in the normal
display mode.
The average fuel economy is
updated once every 10 seconds.
When you reset a trip meter, the
average fuel economy for that trip
meter also resets. To reset the
values in the trip computer, press
and hold the SEL/RESET button
until the number resets to ‘‘0.0.’’
: Your vehicle’s average fuel
economy since you last reset the trip
computer B.
: Your vehicle’s average fuel
economy since you last reset the trip
computer A.
: The average speed you are
travelling is displayed in kilometers
per hour (km/h) or miles per hour
(mph) depending on the display
mode you selected.
: The time travelled since
you last turned the ignition switch to
the ON (II) position.
This distance is estimated from the
fuel economy you have achieved
over the last few kilometers (miles),
so it will vary with changes in speed,
traffic condition, etc.
: The estimated distance you
can travel on the fuel remaining in
the tank.
The display may show a instant fuel
economy reading higher than in
normal driving while the particulate
matter (PM) is burnt and removed
from the diesel particulate filter
(DPF). For more information, see
page
.
: Your vehicle’s current fuel
economy is shown in mpg.
: Your vehicle’s current fuel
mileage in kilometers per hour and
L/100 km.
595
On diesel models with DPF
Multi-Information Display
Instruments and Controls
94
TRIP METER
ODOMETER
OUTSIDE TEMPERATURE
INDICATOR
09/01/28 17:44:51 32SMG631_099