Honda legend, Руководство пользователя, Страница: 507 / 611

Do not pull up the end of the
holder forcibly and bend the
holder excessively while removing
the blade. This could damage the
holder.
Lower the wiper arm down against
the windscreen, the passenger’s
side first, then the driver’s side.
Make sure the blade is completely
installed and that its edge is not
bunched up.
Install the new blade onto the
blade assembly:
Pull back either end of the blade
assembly.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Reinstall the cap on the wiper arm
along to the slit on the holder.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Place the side of the blade not
labelled ‘‘LOCK’’ on the end of
the blade assembly, and slide
the blade onto the assembly
until it is fully installed.
6.
7.
8.
9.
5.
10.
Maintenance
Wiper Blades
502
BLADE
REINFORCEMENT
09/01/28 18:40:13 32SMG631_507