Honda legend, Руководство пользователя, Страница: 489 / 611

To change a bulb on the left side,
remove the nut on the battery stay,
then push the battery toward the
windscreen to obtain enough
working space.
Open the bonnet.
Reinstall the expansion tank on its
holder, then put the coolant tubes
back in place. Reinstall the over
flow tube to the expansion tank
securely. Put the upper part of the
washer fluid reservoir back in
place.
Put the battery back to its original
position, reinstall the nut on the
stay and tighten it securely.
Turn on the headlights to test the
new bulb.
Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock it in place.
Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.
Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
1.
5.
6.
7.
8.
9.
4.
On the left side
On the right side
Low Beam Headlights
(Diesel models)
Lights
Maintenance
484
CLIP
CONNECTOR
BULB
09/01/28 18:37:36 32SMG631_489