Honda legend, Руководство пользователя, Страница: 29 / 611

The tensioners are designed to
activate in any collision severe
enough to cause the front airbags to
deploy.
For added protection, the front seat
belts are equipped with automatic
seat belt tensioners. When activated,
the tensioners immediately tighten
the belts to help hold the driver and
a front passenger in position.
If the shoulder part of the belt is
pulled all the way out, the lockable
retractor will activate. The belt will
retract, but it will not allow the
passenger to move freely.
To deactivate the lockable retractor,
unlatch the buckle and let the seat
belt fully retract. To refasten the
seat belt, pull it out only as far as
needed.
The seat belts in all rear seating
positions have a lockable retractor
that must be activated to secure a
child restraint (see page
).
The tensioners can also be activated
during a collision in which the front
airbags
. In this case, the
airbags would not be needed, but the
extra tension in the seat belt could
be helpful.
If the front seat belt tensioners ever
activate, they must be replaced as
the belts will no longer retract
properly.
When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled.
The SRS indicator will
come on if there is a
problem with your automatic seat
belt tensioners (see page
).
If a side curtain airbag deploys
during a side impact, the tensioner
on that side of the vehicle will also
deploy.
53
30
If equipped with the lockable retractor
do not deploy
Additional Information About Your Seat Belts
Driver and Passenger Saf ety
Automatic Seat Belt Tensioners
24
09/01/28 17:35:21 32SMG631_029