ENGLISH
11
SEDIMENT CUP
Cleaning
(LOW PROFILE TYPES)
1. Unsnap the air cleaner cover clips, remove the air cleaner cover,
and remove the foam filter element (see page 10).
2. Remove the four 5 mm flange bolts, one 6 mm flange bolt, and
air cleaner case.
Remove the two 6 mm flange nuts and pull out the breather
tube, then remove the air cleaner base.
LOW PROFILE TYPES
3. Move the fuel valve lever to the OFF position.
4. Remove the sediment cup, O-ring and filter.
5. Wash the sediment cup and filter in non-flammable solvent, and
dry it thoroughly.
Gasoline is highly flammable and explosive, and you
can be burned or seriously injured when handling fuel.
• Stop the engine and keep heat, sparks, and flame
away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
AIR CLEANER BASE
AIR CLEANER CASE
5 mm FLANGE
BOLTS
6 mm FLANGE BOLT
5 mm FLANGE BOLTS
6 mm FLANGE NUTS
BREATHER TUBE
FILTER
O-RING (Replace)
SEDIMENT CUP
FUEL VALVE LEVER
OFF
6. Reinstall the filter, new O-ring, and sediment cup as shown.
Tighten the sediment cup securely.
(LOW PROFILE TYPES)
7. Install the air cleaner base, breather tube, air cleaner case, foam
filter element, and air cleaner cover in the reverse order of
removal.
37Z8R803.fm 11 ページ 2014年3月25日 火曜日 午後1時42分