background image

27

DISTRIBUTOR’S LIMITED WARRANTY

This warranty is limited to the following Honda Power Equipment products when 
distributed by American Honda Motor Co., Inc., Power Equipment Division, 4900 
Marconi Drive, Alpharetta, Georgia 30005. The following warranty applies to 
products purchased at retail or placed in rental service on or after January 1, 2010.

(1) Length of Warranty: Batteries supplied with applicable products as standard, 
original equipment are covered by this warranty for a period of 12 months (private 
residential) or 3 months (commercial/rental/institutional use) from the date of 
original retail product purchase.

To Qualify for This Warranty:

The product must be purchased in the United States, Puerto Rico, or the U.S. Virgin 
Islands from American Honda or a dealer authorized by American Honda to sell 
those products. This warranty applies to first retail purchaser and each subsequent 
owner during the applicable warranty time period, unless noted otherwise.

What American Honda Will Repair or Replace Under Warranty:

American Honda will repair or replace, at its option, any part that is proven to be 
defective in material or workmanship under normal use during the applicable 
warranty time period. Warranty repairs and replacements will be made without 
charge for parts or labor. Anything replaced under warranty becomes the property of 
American Honda Motor Co., Inc. All parts replaced under warranty will be 
considered as part of the original product, and any warranty on those parts will 
expire coincident with the original product warranty.

To Obtain Warranty Service:

You must, at your expense, take the Honda Power Equipment product, accessory, 
replacement part, apparel, or the power equipment on which the accessory or 
replacement part is installed, and proof of purchase to any Honda Power Equipment 
dealer in the United States, Puerto Rico, or the U.S. Virgin Islands who is authorized 
to sell and/or service that product, during the dealer’s normal business hours. To 
locate a dealer near you, visit our web site at http://powerequipment.honda.com and 
click on Find Dealer.

If you are unable to obtain warranty service or are dissatisfied with the warranty 
service you receive, contact the owner of the dealership involved; 

normally this will resolve the problem. However, if you should require further 
assistance, write or call the Power Equipment Customer Relations Department of 
American Honda Motor Co., Inc. at the address on page 24.

Exclusions:

1. Any damage or deterioration resulting from the following:

• Neglect of the periodic maintenance as specified in the product owner’s 

manual

• Improper repair or maintenance
• Operating methods other than those indicated in the product owner’s manual
• Increasing engine speed beyond factory specification
• The use of non-genuine Honda parts, accessories, lubricants, and fluids other 

than those approved by Honda

• Exposure of the product to soot and smoke, chemical agents, bird droppings, 

sea water, salt, or other corrosive environments

• Collision, fuel contamination or deterioration, neglect, unauthorized alteration, 

misuse, incorporation or use of unsuitable attachments or parts 

• Normal wear and tear (including, but not limited to, normal fading of painted or 

plated surfaces, sheet peeling, and other natural deterioration)

2. Consumable parts: Honda does not warrant parts deterioration due to normal 

wear and tear. The following parts are not covered by this warranty unless they 
are needed during another repair covered under this warranty: spark plug, fuel 
filter, air cleaner element, clutch disc, tire, wheel bearing, recoil starter rope, 
cable, belt, cutter blade, oil, and grease.

3. Cleaning, adjustment, and normal periodic maintenance work (carburetor 

cleaning, engine oil draining, blade sharpening, belt and cable adjustments).

4. Any product that has ever been declared a total loss or sold for salvage by a 

financial institution or insurer.

5. Auger and paddle assemblies, skid shoes, and scraper bars of snow 

throwers/snow blowers, tiller tines of roto-tillers, and mower blades and mower 
deck housings are specifically not warranted against impact damage including, 
but not limited to, abrasive damage.

Disclaimer of Consequential Damage and Limitation of Implied 
Warranties:

American Honda disclaims any responsibility for loss of time or use of the product, 
transportation, commercial loss, or any other incidental or consequential damage. 

Any implied warranties are limited to the duration of this written limited warranty. 
Some states do not allow limitations on how long an implied warranty lasts and/or 
do not allow the exclusion or limitation of incidental or consequential damages, 
therefore the above exclusions and limitations may not apply to you. This warranty 
gives you specific legal rights, and you may also have other rights, which vary from 
state to state.

Honda Parts, Accessories, and Apparel

This warranty is limited to Honda Power Equipment parts, accessories, and apparel 
when distributed by American Honda Motor Co., Inc., 4900 Marconi Drive, 
Alpharetta, Georgia 30005-8847.

To Qualify for This Warranty:

The parts, accessories, or apparel must be purchased from American Honda or a 
dealer authorized by American Honda to sell those products in the United States, 
Puerto Rico, and the U.S. Virgin Islands. Parts and Accessories must be purchased 
for installation on original Honda equipment or engines to be eligible for warranty 
coverage. Installing parts and accessories on non-Honda products or engines voids 
this warranty.

You must be the first retail purchaser. This warranty is not transferable to 
subsequent owners.

What American Honda Will Repair or Replace Under Warranty:

American Honda will repair or replace, at its option, any Honda Power Equipment 
parts, accessories, replacement parts, or apparel that are proven to be defective in 
material or workmanship under normal use during the applicable warranty time 
period. Anything replaced under warranty becomes the property of American Honda 
Motor Co., Inc. The warranty on all parts, accessories, and apparel replaced under 
warranty will expire coincident with the original warranty on the replaced parts, 
accessories, or apparel.

Parts and accessories installed by a dealer who is authorized by American Honda to 
sell them will be repaired or replaced under warranty without charge for parts or 
labor. If installed by anyone else, parts and accessories will be repaired or replaced 
under warranty without charge for parts, but any labor charges will be the 
responsibility of the purchaser. 

Apparel will be repaired or replaced under warranty without any charge.

To Obtain Warranty Service:

You must, at your expense, take the Honda Power Equipment part, accessory, 
apparel or the Honda Power Equipment on which the part or accessory is installed, 
and proof of purchase to any Honda Power Equipment dealer in the United States, 
Puerto Rico, or the U.S. Virgin Islands who is authorized to sell that product, during 
the dealer's normal business hours. To locate a dealer near you, visit our web site at 
PowerEquipment.Honda.com and click on Find Dealer. 

If you are unable to obtain warranty service or are dissatisfied with the warranty 
service you receive, contact the owner of the dealership involved; normally this will 
resolve the problem. However, if you should require further assistance, write or call 
the Power Equipment Customer Relations Department of American Honda Motor 
Co., Inc. See 

“How to Contact Honda” on 

page 26

.

Exclusions:

This warranty does not extend to parts, accessories, or apparel affected or 
damaged by collision, normal wear, use in an application for which the product was 
not designed or any other misuse, neglect, incorporation or use of unsuitable 
attachments or parts, unauthorized alteration, improper installation, or any causes 
other than defects in material or workmanship of the product. Installing parts and 
accessories on non-Honda products or engines voids this warranty.

Disclaimer of Consequential Damage and Limitation of Implied 
Warranties:

American Honda disclaims any responsibility for loss of time or use of the product, 
or the power equipment on which the product is installed, transportation, 
commercial loss, or any other incidental or consequential damage. Any implied 
warranties are limited to the duration of this written warranty. Some states do not 
allow limitations on how long an implied warranty lasts and/or do not allow the 
exclusion or limitation of incidental or consequential damages, so the above 
exclusions and limitations may not apply to you. 

This warranty gives you specific legal rights, and you may also have other rights 
which vary from state to state.

PWL50623-V

Product Covered by this 

Warranty

Length of Warranty (1)

(from date of original retail purchase)

Private 

Residential

Commercial/Rental/

Institutional

HSS928A • HSS1332A 
Snow Blower

36 months

36 months

Products Covered by 
this Warranty

Length of Warranty

(from date of original retail purchase)

Private 

Residential

Commercial/Rental/

Institutional

Parts

6 months

3 months

Accessories

12 months

3 months

Apparel

6 months

3 months

Содержание HSS1332A

































Отзывы: